During use, how to ensure that the gold sheet of the crystal head and the cable conductor of the Patch Cord are not corroded and oxidized?

When using Patch Cord products, in order to ensure that the gold sheet of the crystal head and the cable conductor are not corroded and oxidized, the following specific measures can be taken:
Material selection: The gold sheet of the crystal head is made of brass plated with gold. Brass itself has good corrosion resistance and oxidation resistance, and the gold plating layer further enhances its corrosion resistance and oxidation resistance. The gold plating layer can effectively isolate the metal from the air and reduce the risk of oxidation and corrosion. The cable conductor uses pure copper with a purity greater than 99.99%. Pure copper itself has good electrical conductivity, thermal conductivity and deformation resistance. At the same time, high-purity copper materials are more resistant to oxidation and corrosion.
Surface treatment: The gold plating process not only provides a beautiful appearance, but more importantly, it forms a protective film on the metal surface, which effectively prevents the oxidation and corrosion of the crystal head gold sheet.
Environmental control: When using Patch Cord products, try to avoid exposing them to harsh environments such as high temperature and high humidity, because these conditions are likely to accelerate oxidation and corrosion reactions. You can consider setting up appropriate temperature and humidity control equipment in the wiring environment to maintain suitable environmental conditions.
Regular inspection and maintenance: Check the Patch Cord products regularly to see if the crystal head gold sheet and cable conductors are damaged, broken, and if there are signs of oxidation and corrosion. If any problems are found, they should be repaired or replaced in time to reduce the risk of corrosion and oxidation.
Storage and transportation: During storage and transportation, care should be taken to avoid contact between Patch Cord products and moist, corrosive substances to reduce the possibility of corrosion and oxidation. Patch Cord products can be stored in a dry, ventilated environment and protected with appropriate packaging materials.
Precautions for use: When installing and using Patch Cord products, the correct installation steps and operating specifications should be followed to avoid damage to the crystal head gold sheet and cable conductors caused by improper operations such as excessive bending and pulling.
Through the comprehensive application of the above measures, it can effectively ensure that the crystal head gold sheet and cable conductors of the Patch Cord products are not affected by corrosion and oxidation during use, thereby extending the service life and performance stability of the product.