Wholesale SMT-1034T8C6-FTP Shielded CAT6 Inline Coupler Suppliers, Company

SMT-1034T8C6-FTP Shielded CAT6 Inline Coupler

Series description: Meet the category 6 transmission standards, in line with T568A and T568B line sequence, suitable for communication socket connection between equipment and work area. The shape is compact, and both ends are equipped with RJ45 crystal sockets, which can directly connect the network cable at both ends to extend the network cable.

1. Embedded design, can be used with panels and patch panels, and the network cable can be fixed and connected through the card position.

2. Connection method: RJ45 crystal head 1 to 1 straight-through type. The contact pin contact adopts high and low dislocation technology, which effectively reduces the near-end crosstalk value.

3.360 degree all-round shielding shell design to prevent EMC electromagnetic interference; all-metal zinc alloy die-casting design, unique grounding design, reliable and convenient performance.

4. Environmental requirements: meet ROHS standards.

5. Material introduction: This module product is used to connect the horizontal wiring and work area wiring on the same floor of the building, and is mainly used for wiring equipment and terminal equipment or adapter conversion connection. Product mating and mating cables are copper-axle twisted pair cables and copper-axle jumpers.

6. Inter-matching relationship: Inter-match with connectors of the same standard series.

7. Applicable standard: General specification: YD/T 926.1-2009

Sub-standard: YD/T 926.3-2009

8. Technical parameters:

Electrical Characteristics:

A. Frequency range: 1～250MHz

B. Working voltage: 125 V

C. Withstand voltage: DC1000V (AC750V) 1min without breakdown and arcing phenomenon

D. Near-end crosstalk attenuation NEXT: ≥3dB

Mechanical properties:

A. Insertion force and pull-out force: the insertion force is not more than 20N, and the pull-out force is not less than 20N

B. Effect of connector connection device: 50N 60±5s

Durability:

A. The number of times the plug and socket are inserted: 750 times

9. Material and surface treatment:

A. Metal material:

Gold Needle: Phosphor Bronze Gold Plated

Housing: Zamak 5, nickel plated

B. Non-metallic materials:

Plastic: PC Polycarbonate S

C. Thickness of gold-plated layer: 6~50U gold-plated

D. PCB material: FR4

10. Environmental performance: Temperature: -25～+70℃ Humidity: ≤85% (temperature 85℃±3℃)

Salt spray test:

A. The pH value of the salt solution before atomization is between 6.5 and 7.2 (35±2℃);

B. The salt solution is prepared with sodium chloride (chemically pure, analytically pure) and distilled or deionized water.

Its concentration is (5±0.1)% (mass percentage);

C. Continuous atomization is adopted, and the recommended duration is 48h;

D. When atomizing, it is necessary to prevent impurities such as oil and dust and the temperature and humidity of the jet air from affecting the work.

conditions for the space.

11. Outline drawing and maximum size:

12. Packaging and storage: The product is put into a special blister bag, and then put into a cardboard box, and the product accessories are placed at the same time, and a label indicating the product model and quantity is affixed on the upper left corner of the front of the carton , and put it in the carton. The packaged products should be stored in a warehouse where the ambient temperature is -5℃~+30℃, the relative humidity is not more than 70%, and there is no acid, alkali and other corrosive gases in the surrounding air, and the storage period is three years.

Regular packing quantity: 10 boxes per carton, 50 pcs per box, 500 pcs per carton.

13. Note: product use mark: customer specified packaging.